Results 1 to 5 of 5

Thread: Roller bearings 0.25 x 0.50 needed - Peugeot

  1. #1
    AdminGuy Guest

    Default Roller bearings 0.25 x 0.50 needed - Peugeot

    Can anyone help Daniel out?

    Good night ( it is 22 in Paris France ), To restore my vintage Peugeot motorbike ( year 1934 ) I need 17 rolls diameter 1/4 inch , 1/2 inch lenght to overhaul connecting rod. I had contacted all bearing rolls manufacturers, parts are unobtainable. Could you help me if parts are existing in America? I send you a picture, as you can see Peugeot don't look like Indian or Harley........ Regards Daniel
    daniel.ollery@wanadoo.fr

  2. #2
    Barry Brown Guest

    Default

    Harley used 1/4 inch diameter rollers in .550" and .490" lengths so you could cut down the long ones or use the shorter and not worry about the .010" . The former were used on right crankcase 45's . old part number 305-29 and the latter on MANY applications including wheel hubs, left crankcase VL's ( should be available from Steve Slocombe in England) many Harley gearboxes etc. etc. Harley 45 restoration will have them as will many other dealers. good luck.
    PS Indian also used a .250 roller here and there

  3. #3
    Barry Brown Guest

    Default

    I forgot, the old part number for the latter rollers is 2289-25 The nice thing about Harley rollers is that they are generally available in .002 " oversize increments. Indian rollers are also available oversize AND undersize!

  4. #4
    Smarty Guest

    Default

    Have you tried the Vintage Bearing Co in the UK ?

    http://www.vintagebearings.co.uk/frames.htm

    They have a very good selection and are very helpful.

    Regards,

    Martin

  5. #5
    Jack_Hester Guest

    Default Modern roller numbers

    H-D Late OEM number: 9220 - Size: 0.250"x0.490"
    H-D Late OEM number: 9241 - Size: 0.250"x0.550"

    Jack

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •