Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: UL frame identification

  1. #21
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,794

    Default

    Quote Originally Posted by Kozy View Post
    On center case stud just above VIN No.
    Not on a UL.., rear cylinder stud as stated previously. The carb support is on the center stud on the left side.
    Robbie Knight Amca #2736

  2. #22

    Default

    Quote Originally Posted by Rubone View Post
    Not on a UL.., rear cylinder stud as stated previously. The carb support is on the center stud on the left side.
    Thanks, in the picture I attached the clip is installed upside down. Used on OHV only?

  3. #23
    Join Date
    Jul 2002
    Location
    North Hills, CA and Pine Grove, CA
    Posts
    5,464

    Default

    Look at the picture I posted above. It shows the correct clip and location.
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

  4. #24
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,794

    Default

    Kozy,
    The OHV clip is shaped differently than the SV type. The OHV is a one piece heavy spring clip, the SV is two piece with a compound bend to line the cable up correctly.
    Robbie Knight Amca #2736

  5. #25
    Join Date
    Jul 2006
    Location
    Central Florida
    Posts
    941

    Default

    Quote Originally Posted by shyambiker View Post
    Can you also please let me know where does this throttle bracket fit on the cylinder head.Attachment 26581Attachment 26581
    Front cylinder head, UL, under a head bolt. There is a special provision in form of a detour of one fin out-of-the-way to accommodate that where it belongs on a stock head.

  6. #26
    Join Date
    Mar 2010
    Location
    Western Australia
    Posts
    78

    Default

    Quote Originally Posted by shyambiker View Post
    Hi Eric,
    Can you please let me know where does this Speedo clip fit on the ul.
    Part no : 67075-36
    If possible a picture please.
    Regards,
    Shyambiker.


    Speedo cable clip #67075-36 was formerly known as #11136-36 and according to one of my H-D catalogs it was not only used for certain OHVs. It was also used for some BTSVs, at least for 1937–38, and it connected to the top case stud just above the serial number. See the photo posted earlier by Kozy.

    Throttle cable bracket looks like #3371-37 (new #56604-37) and it looks like it’s visible in Kozy’s picture. There’s also a photo on page 129 of volume one of Palmer’s second edition if you’ve still got it? And you’ll get another view of that bracket on page 304.
    Eric

  7. #27

    Default

    Quote Originally Posted by Speeding Big Twin View Post
    Speedo cable clip #67075-36 was formerly known as #11136-36 and according to one of my H-D catalogs it was not only used for certain OHVs. It was also used for some BTSVs, at least for 1937–38, and it connected to the top case stud just above the serial number. See the photo posted earlier by Kozy.

    Throttle cable bracket looks like #3371-37 (new #56604-37) and it looks like it’s visible in Kozy’s picture. There’s also a photo on page 129 of volume one of Palmer’s second edition if you’ve still got it? And you’ll get another view of that bracket on page 304.
    Eric
    Thank you so much.
    Regards,
    Shyambiker.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •