Results 1 to 2 of 2

Thread: Rivets for my 45 sidecar

  1. #1
    Join Date
    Sep 2012
    Posts
    160

    Default Rivets for my 45 sidecar

    Does anyone have the part number or a company who sells the same type rivet that's in the sidecar body. I have totally redone the body, rust and everything not correct has been fixed Replaced the bottom and both sides. The best I can see is the heads are about 5/8s of an inch head, etc etc but would just like the correct rivet to make job complete. This is for a 1945 UL side car
    Last edited by Sidehacker; 10-09-2019 at 06:04 AM.

  2. #2

    Default

    1/4x5/8 thrust head, Old Dude has them I believe or you can try Hanson Rivet and Supply Company, Pacoima California. But they sell by the pound.
    Hope this helps. Good Luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •