Results 1 to 7 of 7

Thread: 67 Shovelhead 4 Speed

  1. #1
    Join Date
    Jul 2014
    Posts
    22

    Default 67 Shovelhead 4 Speed

    Does anyone know if there is a tool made to install a main drive gear shaft seal for 67 4 speed, as you know this is a small seal and difficult to get started straight. ? Or any advise on installing one. As always I appreciate the info.

    Thanks

  2. #2
    Join Date
    Sep 2007
    Location
    Jersey City
    Posts
    2,065

    Default

    With the exception of turning down a piece of round stock and making your own. I know of non. Just put a socket on it and have way with it. Bob L
    Last edited by Robert Luland; 08-19-2019 at 07:39 PM.

  3. #3

    Default

    I always bought a couple extras when replacing that seal!

  4. #4
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,724

    Default

    PVC tubing.
    Robbie Knight Amca #2736

  5. #5
    Join Date
    Apr 2010
    Posts
    1,105

    Default

    I make seal installers on my lathe out of PVC like Robbie said.I take dimensions & go to hardware store & buy a pipe or usually connector & turn it down.The seal is supposed to be .050" in from face of case,so I make a step to set to right depth
    Attachment 25565
    Last edited by duffeycycles; 08-20-2019 at 08:04 AM.

  6. #6
    Join Date
    Jun 2019
    Posts
    9

  7. #7
    Join Date
    Nov 2018
    Posts
    154

    Default

    Jims make a tool, #2256-1, but at around $100, you would need to use it almost daily to make it worthwhile.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •