Results 1 to 8 of 8

Thread: Daven-port!

  1. #1
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,282

    Default Daven-port!

    Sorry if this rubs anybody,..

    But its Davenport time again, Folks!

    http://www.chiefblackhawk.org/

    For the first time, I'm bringing some personal stash, like a John Brown and an RM.
    And Milwaukee gems too.

    So please drop by at booth AG30, close to the race gate, opposite the little white schoolhouse 'museum'.
    (Look for tired cafe umbrellas...)

    Hope to see you there!

    ....Cotten
    Attached Images Attached Images
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  2. #2
    Join Date
    Oct 2010
    Location
    The First State
    Posts
    165

    Default

    Another bucket list event to attend one of these days.
    Craig (Delaware)
    Perkiomen Chapter
    AMCA Member #1011

  3. #3
    Join Date
    Dec 2014
    Location
    Okanagan Valley,B.C.
    Posts
    66

    Default

    Cotten,
    Hope to track you down there and pick your brain a bit. Will you have peek seals and floats with you ?
    This will be my first time at Davenport. About a 2,300 mi. drive. Hopefully I have no problems and will get there
    by Monday or Tuesday and rest up a bit before swap meet.

    Good luck to all.
    Rod
    AMCA#25781

  4. #4
    Join Date
    Apr 2010
    Posts
    1,112

    Default

    2019 Blackhawk poster
    Blackhawk 2019 poster.jpg

  5. #5
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,282

    Default

    I've cut seven kinds of floats, Rod!

    PEEK seals are something I must cut "one-off" for each manifold, as often the manifold needs work.

    Otherwise, its one-size-fits-none.

    I will have Chief manifolds fitted and ready, though, and kits for Power-Plus's with the proper gasket.
    And maybe a WL, a -33 V, and a K/WR if Colony ever sends back my nuts.

    ....Cotten
    Last edited by T. Cotten; 08-19-2019 at 01:18 PM.
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  6. #6
    Join Date
    Apr 2010
    Posts
    1,112

    Default

    Do't forget the races on friday nite
    img771.jpg

  7. #7
    Join Date
    Dec 2014
    Location
    Okanagan Valley,B.C.
    Posts
    66

    Default

    Quote Originally Posted by T. Cotten View Post
    I've cut seven kinds of floats, Rod!

    PEEK seals are something I must cut "one-off" for each manifold, as often the manifold needs work.

    Otherwise, its one-size-fits-none.

    I will have Chief manifolds fitted and ready, though, and kits for Power-Plus's with the proper gasket.
    And maybe a WL, a -33 V, and a K/WR if Colony ever sends back my nuts.

    ....Cotten
    Cotton,
    I guess I should have supplied more info. Am working on a 40EL, original manifold M-25 carb. Sounds like seals are out How about a float?
    Thank you.
    Rod
    AMCA#25781

  8. #8
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,282

    Default

    As I posted, Rod,

    I'll have seven kinds of floats.

    If you had gotten the manifold to me a week ago, I could have outfitted it by the Meet.

    (If you didn't need new nuts, that is. Reproductions vary widely, and I fit the seals to the nuts as well as the manifold spigots).

    ....Cotten
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •