Results 1 to 2 of 2

Thread: 1934 vl

  1. #1
    Join Date
    Apr 2012
    Posts
    15

    Default 1934 vl

    I am trying to straighten a frame for a 1934 VL. Can anyone help with the dimensions and specs. Thank you.

  2. #2
    Join Date
    Jan 2003
    Location
    England
    Posts
    1,317

    Default

    Sorry I missed your call yesterday. My frame guys like to see the frame with the forks and wheels on as a rolling chassis. Inside front fork rockers is about 7.5" and inside rear frame is about 8.5" where the wheel goes through. A rod through the headstock should be at right angles to the axles. Engine mounts should be flat and fit the crankcases. Footboard support rods should be square with the frame and so on. It's a strong frame but a head-on crash will bend the front downtube and cock the headstock. Careful viewing from the rear will usually show what needs doing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •