Results 1 to 1 of 1

Thread: Sunnen wet hone with all the tooling needed to do Indian Chief lower ends.

  1. #1
    Join Date
    Nov 2008
    Posts
    265

    Default Sunnen wet hone with all the tooling needed to do Indian Chief lower ends.

    This is a Sunnen wet hone in good working condition. I've had this for 45 years and done a lot of engines with it. It comes with all the mandrels and truing sleeves to do Chief connecting rods and cases. 2 of .720" mandrels for the upper rod bushings. A 1.5" mandrel for the lower rod races. And a 5 stone 1.375" mandrel for line honing Chief cases. I have a way to line hone ALL chiefs without case damage. Includes a bunch of spare stones and belts and a few extra gallons of cutting oil.
    I need $2200 for this. It's Pick Up only, I'm in Lakeland, Florida between Tampa and Orlando.
    Please contact direct at cdf6333@hotmail.com.

    IMG_2084.jpgIMG_2085.jpgIMG_2083.jpg
    Last edited by cdf6333; 05-21-2019 at 11:09 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •