Page 6 of 6 FirstFirst ... 456
Results 51 to 59 of 59

Thread: 2 more JD's for the road

  1. #51
    Join Date
    Aug 2013
    Location
    1 mile east of the Rocky Mountains.
    Posts
    860

    Default

    When Cotten rebuilt my local buddy's DLX58 for his '29, it came back with a round float.

  2. #52
    Join Date
    Nov 2018
    Location
    Reno NV
    Posts
    167

    Default

    It is hard to know as different companies seem to use different OEM pt no's for the same part.
    I prefer a round float.
    Are you able to supply this, or should I go to one of the retailers?

    Gasket, 1204-21
    Cheers
    Last edited by aumick10; 06-29-2019 at 04:28 PM.

  3. #53
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,207

    Default

    Quote Originally Posted by Steve Swan View Post
    When Cotten rebuilt my local buddy's DLX58 for his '29, it came back with a round float.
    Round on the outside, Steve!

    But the hole in the middle for DLXs was spaced out,.. eccentric.

    And there are two sizes of those!

    Looking forward to any literature that places a horseshoe upon a DLX.
    (It won't surprise me much.)

    ....Cotten
    PS: Certainly, Mick,..
    I have bronze-bowl DLX floats ready; Just email me direct at liberty@npoint.net.
    Postage to CA should be about $4.

    PPS: I guess my point here is that any float that floats should work.
    Last edited by T. Cotten; 06-29-2019 at 04:45 PM.
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  4. #54
    Join Date
    Nov 2018
    Location
    Reno NV
    Posts
    167

    Default

    I had a distributor shaft seize up and take out the generator drive gear.
    Going through my other distributors, I found one that I haven't seen before.
    20190711_102240.jpg20190711_095024.jpg
    As you can see from the photos, this has a timer cam in it, no rotor drive flat, but it still has the distributor cap springs clip mounts.
    It also has a set screw on the side that can lock up the advance mechanism.

    Has anybody come across this before.
    Is it a OEM crossover timer, or has somebody made it up.
    Cheers,
    Mick

  5. #55
    Join Date
    Nov 2018
    Location
    Reno NV
    Posts
    167

    Default

    Help identifing float needle and seat.
    I have a bean pot bowl that has the high casting for the needle and seat. The one on the right of the picture.
    It seems like it should take the Harley OEM # 27382-33 assembly ( Indian 102453) This puts the float at the correct height.

    However this assembly has a 7/16" thread, and the bowl I have has a 3/8" thread.

    Can anybody help with a pt no for the correct assembly. I don't want to drill out the 3/8 thread to fit the 7/16" assembly.

    This bowl is for a DLX 128.

    Thanks,
    Mick20190913_114015.jpg
    Last edited by aumick10; 09-13-2019 at 01:52 PM.

  6. #56
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,207

    Default

    The '40 valve was unique, Mick!

    Its on the left, and earlier Scheb valves don't fit.

    The Marvel part number is 233-550, for 34-60 valve, and 36-191 seat.

    Indian's number was 102162

    Good luck,

    ....Cotten
    PS: The last one I opened was wrapped in newspaper with want ads for "colored cleaning ladies".
    I was raised by such.
    Attached Images Attached Images
    Last edited by T. Cotten; 09-13-2019 at 04:09 PM.
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  7. #57
    Join Date
    Nov 2018
    Location
    Reno NV
    Posts
    167

    Default

    Thanks Tom,
    Jerry Greer has them listed.
    I am amazed how many early carbys have been stripped and lost all the parts. I hate seeing incomplete items.
    Cheers

  8. #58
    Join Date
    Jun 2001
    Location
    Central Illinois, USA
    Posts
    4,207

    Default

    Quote Originally Posted by aumick10 View Post
    Thanks Tom,
    Jerry Greer has them listed.
    I am amazed how many early carbys have been stripped and lost all the parts. I hate seeing incomplete items.
    Cheers
    What's worse, Mick,..

    Are the "beanpot" reproductions shown on ebay with a float installed upside down.
    Some totally whacked for OHVs...

    (Contrary to popular legend, they do NOT have a larger volume than Linkerts!)

    ....Cotten
    Attached Images Attached Images
    Last edited by T. Cotten; 09-13-2019 at 03:38 PM.
    AMCA #776
    Dumpster Diver's Motto: Seek,... and Ye Shall Find!

  9. #59
    Join Date
    Nov 2018
    Location
    Reno NV
    Posts
    167

    Default

    Where I come from, the float is correct, it is the bike that is upside down.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •