Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: Positioning of front fender light.

  1. #21
    Join Date
    Mar 2010
    Posts
    154

    Default

    Perfect!

    Happy New Year!

  2. #22
    Join Date
    Dec 2018
    Location
    Molndal, Sweden
    Posts
    49

    Default

    Hi Chris, thank you for sharing this picture. That is interesting because I know that the light installed in my bike came from a long time ago with it, I mean the light itself is original and the holes on the fender were quite old, visibly old, as I have recently repainted the motorcycle. My motorcycle doesn’t have, however the pipes under the front fender, for passing through the wiring. That explains that the lights were installed, at some time, but did not come straight from the factory as I see it. It doesn’t look bad at all the way it was done, as you can see on the picture yourself, but the position is evidently not the same. Thanks for sharing and I will learn along. At the end of the day, most important is to have these old motorcycles up and running and alive... Happy new year! Ed
    Attached Images Attached Images
    Last edited by epazikas; 01-01-2019 at 04:44 AM.

  3. #23

    Default

    fender light wiring.jpgfender light wiring 2.jpg

    Here is how the wiring looks from under the fender. Hope this helps.

  4. #24
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,797

    Default

    Here is how the wiring looks from under the fender. Hope this helps.
    That is how it looks on a '48, not how it looks on earlier bikes where the tube pierces the fender.
    Robbie Knight Amca #2736

  5. #25

    Default

    Yes of course you are correct - 1948.

    Oops

  6. #26
    Join Date
    Feb 2011
    Location
    Pa
    Posts
    99

    Default

    How should it look on a VL?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •