Results 1 to 5 of 5

Thread: try again Transmission MAINSHAFT thrust washer

  1. #1

    Default try again Transmission MAINSHAFT thrust washer

    Is pin P/N 600 for transmission MAINSHAFT thrust washer needed?

  2. #2
    Join Date
    Oct 2016
    Posts
    102

    Default

    What year are you working on?

  3. #3

    Default

    1966 xlch..got the bike apart for crank rebuild and noticed the pin for trans thrust wash not in case..after inspection of washer ect. all is good no metal transfer no burn and checks on mic...was wondering if pin is needed..I did order pin and going to install but I was interested in others thoughts on this

  4. #4
    Join Date
    Oct 2016
    Posts
    102

    Default

    My thoughts are it keeps the thrust washer from turning....if all looks fine I guess it most have been happy without it, but I would put it back in.

  5. #5

    Default

    Agreed..thanks for input

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •