Results 1 to 3 of 3

Thread: 67 Shovelhead Rear Brake

  1. #1
    Join Date
    Jul 2014
    Posts
    25

    Default 67 Shovelhead Rear Brake

    Can someone tell me what type of washer is used on the outer block that the banjo bolt goes through to the wheel cylinder on the rear drum brake of a 67 Shovelhead? I used copper but it wanted to leak. The manual doesn't indicate.

    Thanks!

  2. #2
    Join Date
    Jul 2008
    Location
    North Carolina
    Posts
    642

    Default

    There are (2) copper crush washers (p/n 41744-58) that goes (one each side) on the swivel fitting (p/n 41750-63) that the banjo bolt (p/n 41743-58) passes through.
    William Edwards, AMCA #10035

    Attend the 2019 Southern National Meet at Denton Farmpark, NC, 17-18 May 2019
    http://www.amcasouthernnationalmeet.com/

  3. #3
    Join Date
    Dec 2001
    Posts
    429

    Default

    Available at any good auto parts store. Grooved both sides. Easy to figure i.d and o.d.
    DrSprocket

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •