Results 1 to 4 of 4

Thread: Pro clutch with mouse trap

  1. #1
    Join Date
    Sep 2017
    Posts
    2

    Default Pro clutch with mouse trap

    My bike is a 1961 Harley panhead FLH with mouse trap. I am installing a new Rivero Pro clutch can anyone tell me the correct sequence to adjust the mousetrap and the clutch

  2. #2
    Join Date
    Jan 2008
    Location
    S.E.N.Y. State American side of Hudson River
    Posts
    437

    Default

    Hopefully you have a manual or someone could put the page up here. My advice is to get a manual cause you WILL need it. It is a little confusing but you should be able to do it even with the Riviera clutch. Just beware they call it a mousetrap for a reason. Wear thick work gloves when putting your fingers where they don't belong.
    D. A. Bagin #3166 AKA Panheadzz 440 48chief W/sidecar 57fl 57flh 58fl 66m-50 68flh 70xlh

  3. #3

    Default

    Yes, the task is challenging. You ill need to learn various ways to adjust the pulling force of a mousetrap racer in a professional manner. The process is not easy!

  4. #4

    Default

    I've done this more than once.The diaphram clutches don't travel as far to release.You may find the clutch bottoms out before full handle pull.You just need to adjust it so the release/grab point is comfortable.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •