Results 1 to 2 of 2

Thread: 1940's Indian Sidecar Help Needed

  1. #1

    Default 1940's Indian Sidecar Help Needed

    Beginning the process of installing the factory sidecar brackets on my 1947 Chief. When I mock-up the front bracket, the left side bracket section fits nicely around the left downtube at the proper angle. The right side bracket section then lines up with the right downtube where it mounts into the brazed lug so it does not mount flush due to the two different thicknesses at the joint. Can anybody tell me if that is how it is supposed to mount or??? Any help/info would be appreciated. Thanks.

  2. #2
    Join Date
    Aug 2009
    Location
    rural eastern South Dakota
    Posts
    932

    Default

    I had to shim the frame outwards, by slipping a 5/8" flat washer between the motor mount bracket and the frame lug on each side. I slid the bracket down as far as I could.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •