Results 1 to 6 of 6

Thread: 62 rear brake master cylinder

  1. #1
    Join Date
    Sep 2010
    Location
    SPRINGFIELD,OH
    Posts
    109

    Default 62 rear brake master cylinder

    anyone out there rebuilding original rear brake master cylinders ? running a/m one now, but have original to rebuild. thanks

  2. #2
    Join Date
    Nov 2008
    Location
    Virginia
    Posts
    426

    Default

    You can buy a rebuild kit and do it yourself. Napa has them. If it needs the bore re-sleeved then check Hemming's for folks that do that work. If all it needs is honing you can also do that yourself.

    Tom (Rollo) Hardy
    AMCA #12766

  3. #3
    Join Date
    Sep 2010
    Location
    SPRINGFIELD,OH
    Posts
    109

    Default

    thanks tom. i will get it cleaned up and get with local napa on kit. good winter project.

  4. #4

    Default

    Do you no the NAPA part number? Thanks

  5. #5

    Default

    Often after rebuilds the cups get cut by sharp edges from honing.
    Local dealer[back in the day] refused to rebuild them because of comebacks.

  6. #6
    Join Date
    Nov 2008
    Location
    Virginia
    Posts
    426

    Default

    No I don't off the top of my head but J&P also carries them part #2400560 $16.65.

    Tom (Rollo) Hardy
    AMCA #12766

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •