Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: VL Dash Variations

  1. #11
    Join Date
    Jan 2003
    Location
    England
    Posts
    1,034

    Default

    When I've seen the odd original VL dash it has had wiring attached. You can see from the wiring diagram that the main harness comes up through the hole in the right hand side of the base and is partly wired to the top of the dash contacts rather than the bottom.

  2. #12
    Join Date
    Jan 2008
    Posts
    147

    Default VL dash variations

    Here is a picture of the complete original dash for my 1930 DLD. I would assume the 1930 VL was the same. The other dash with very little remaining wiring is from my 1930 C single.hd dld 003.jpghd dld 005.jpg

  3. #13

    Default

    Tom
    Do the mounting tabs on either have the reinforcements as shown earlier in this thread?
    Thanks
    Mark Masa

  4. #14
    Join Date
    Jan 2008
    Posts
    147

    Default

    Mark
    Both dashes have the reinforcing on the mounting tabs.
    Tom

  5. #15

    Default

    Thanks Tom
    Mark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •