Results 1 to 5 of 5

Thread: 1908 Twin

  1. #1
    Join Date
    Apr 2003
    Posts
    649

    Default 1908 Twin

    Could anyone help me out with pictures of, or parts for the ignition contact mechanism? I'm really struggling to find good info on this motor. It is otherwise complete and in very good condition, I would like to fire it up in the test stand. I also need the exhaust port nuts and head pipes, but could fabricate these parts. Thanks for any help. Kyle
    Kyle Oanes AMCA # 3046

  2. #2
    Join Date
    Apr 2003
    Posts
    649

    Default 1908 Twin

    P7260758.JPG I thought a picture might help with a response or two. I have since returned the intake system to the correct position. It was reversed when I found it for some unknown reason. I noticed that there is a large gap between the pushrods and valve stem. Was a cap fit to the top of the pushrod?
    Kyle Oanes AMCA # 3046

  3. #3
    Join Date
    Jul 2011
    Location
    South Australia, Australia
    Posts
    26

    Default

    Hey Kyle, send me your email address in a PM and I will send you a copy of the 1908 parts list. It might be able to help you make the ignition contact assembly. Cheers, Jamie

  4. #4
    Join Date
    Apr 2003
    Posts
    649

    Default

    Thank You Jamie. The parts list will answer a lot of my questions.
    Kyle Oanes AMCA # 3046

  5. #5
    Join Date
    Jan 2006
    Location
    Menomonie, WI
    Posts
    1,152

    Default

    Wow Nice engine Kyle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •