Results 1 to 10 of 115

Thread: 38 Indian Chief

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2010
    Location
    in someone's crosshairs
    Posts
    234

    Default 38 Indian Chief

    I've been hauling the frame, front end & wheels for a 38 Chief for the better part of 35 years. I guess it's time to fish or cut bait with it.






  2. #2
    Join Date
    Jan 2010
    Location
    in someone's crosshairs
    Posts
    234

    Default

    Remove the rubber bumper from the front fender and found some original paint.






    I also found that I had a pair of correct cylinders, they're in rough shape but they can be saved. More on that later.




  3. #3
    Join Date
    Oct 2011
    Posts
    486

    Default

    I also have a 38 chief project,but I am no expert.
    I believe your cylinders are 35-37.I believe the lowest exhaust port fin is one fin with the cylinder on 38-39 chiefs.
    Tom

  4. #4
    Join Date
    Dec 2011
    Location
    Falco Colo.
    Posts
    139

    Default

    fish on. that chum n worked.
    gww57.com

  5. #5
    Join Date
    Jan 2010
    Location
    in someone's crosshairs
    Posts
    234

    Default

    You sir are correct. The rest of the engine is a 37 too. It's what I got on the shelf. The purist can cannibalize it after I'm gone.

  6. #6
    Join Date
    Jan 2010
    Location
    in someone's crosshairs
    Posts
    234

    Default

    The bore for the kicker shaft was egged out so I cleaned it up and installed an oversize shaft in it.




  7. #7
    Join Date
    Jan 2010
    Location
    in someone's crosshairs
    Posts
    234

    Default

    Things are progress nicely, I've got a rolling chassis at this point. A big thanks to Greer Engineering for powder coating and lacing the wheels.






Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •