Results 1 to 4 of 4

Thread: 1934 VLD exhaust

  1. #1

    Default 1934 VLD exhaust

    Questions on the " High flow " exhaust on my 1934 VLD .
    Does the " rear hanger ( 1064-32 ) " bolt to the inside or outside of the frame ?
    Do the pointed parts of the " rear hanger clamp ( 1065-32 ) " go up or down ?
    I am having trouble getting all the clamps to line up & have the rear stand working . The top clamp that bolts to the fender brace ( forgot to get that part # ) is about an inch short of lining up with the fender brace bolt . That is with the " rear hanger " clamp bolted to the frame, which dictates how high the muffler tip can go .
    Are there bad clamps out there ? I bought these back in 2004 from Harbor Vintage .
    Hope This isn't too confusing .
    Any help would be great . Thank you , Mike

  2. #2
    Join Date
    Jun 2010
    Posts
    294

    Default

    Muffler clamp on outside, pipe tucks between wheel and stand then curves out, there is a clamp between pipe top and right fender flip bolt.

  3. #3
    Join Date
    Jan 2003
    Location
    England
    Posts
    1,322

    Default

    The problem is usually with the repro muffler tail, which isn't kicked up high enough to meet the bracket.

  4. #4
    Join Date
    Jun 2010
    Posts
    294

    Default

    The problem is usually with the repro muffler tail, which isn't kicked up high enough to meet the bracket.
    Time to make your own bracket when that happens.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •