Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Looking for an old thread......

  1. #1
    Join Date
    Mar 2009
    Posts
    543

    Default Looking for an old thread......

    Hello Group,

    I recall reading a thread here in this forum a few or several years ago, authored by Steve Little.
    After an hour of fruitless searching, I decided to go ahead and humbly ask for help.....

    I am interested in the information Steve showed in his thread about removing/replacing the seat post tube on a rigid frame. I searched most all the threads started by Mr. Little, but never did find exactly what I am looking for. I know it is a complex and difficult process, and the presentation may have been part of a larger project Steve was working on.

    I would very much like to 'look over the shoulder' of the master, and find that information. Any help....?

    Thanks in advance,
    Tom

  2. #2
    Join Date
    Sep 2001
    Location
    United States
    Posts
    459

    Default

    Not sure if you will be able to find it because I don't see a search... but here is a link to the archived pages (do not click the View Full Version link at the top as it will only bring you back here):

    http://www.antiquemotorcycle.org/bbo...hive/index.php
    Jim

    AMCA #6520

  3. #3

  4. #4
    Join Date
    Mar 2009
    Posts
    543

    Default

    Quote Originally Posted by WebKahuna View Post
    Thanks, WebKahuna. That was the thread that I thought I would find the info, but I don' see what I am looking for. Thanks anyway.


    Quote Originally Posted by Jim View Post
    Not sure if you will be able to find it because I don't see a search...
    I don't understand what you mean: "I don't see a search".....?

  5. #5
    Join Date
    Sep 2001
    Location
    United States
    Posts
    459

    Default

    Quote Originally Posted by Rooster View Post
    I don't understand what you mean: "I don't see a search".....?
    I meant that after you click on that link I show above, there isn't a box to search in with the archived pages. OR is there??? 8^)
    Jim

    AMCA #6520

  6. #6
    Join Date
    Mar 2009
    Posts
    543

    Default

    Quote Originally Posted by Jim View Post
    I meant that after you click on that link I show above, there isn't a box to search in with the archived pages. OR is there??? 8^)
    Oh, I just use the 'Advanced Search' box at the upper right of this page.

  7. #7
    Join Date
    Apr 2008
    Location
    Upper Yarra Valley, Victoria. Australia
    Posts
    892

    Default

    Hi Jim. I'd offer to come around but it's little bit far.
    Post some pics, we might be able to do the job by correspondence.
    Regards Steve
    Steve Little
    Upper Yarra Valley. Victoria.
    Australia.
    AMCA member 1950

  8. #8
    Join Date
    Mar 2009
    Posts
    543

    Default

    Thank-you, Steve. (My name is Tom, by the way. But Jim is a good name, too.)

  9. #9
    Join Date
    Apr 2008
    Location
    Upper Yarra Valley, Victoria. Australia
    Posts
    892

    Default

    Morn'in Tom, we're off to a flying start. Apologies for the mis naming. And good morning to Jim as well.... no exclusions in this playground. The Seatpost assembly could be replaced, or we might get away with a repair section, but a snap of the damage will tell us, and then we can hunker down and rub the stubble on our chins while we asses our options.
    Regards Steve
    Steve Little
    Upper Yarra Valley. Victoria.
    Australia.
    AMCA member 1950

  10. #10
    Join Date
    Mar 2009
    Posts
    543

    Default

    Hello Steve, (tip of the hat to Jim, too....)
    Say, I sent you a Private Message. Check it out.
    Tom

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •