Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 69 xlh motor question

  1. #1

    Default 69 xlh motor question

    I am currently rebuilding a 69 xlh motor . This is my first xlh and not familiar with oil line connections. What is the port at 7 o'clock to the rear exhaust cam and what type fitting does it take

  2. #2
    Join Date
    Jul 2002
    Location
    North Hills, CA and Pine Grove, CA
    Posts
    5,464

    Default

    Pictures?...
    Be sure to visit;
    http://www.vintageamericanmotorcycles.com/main.php
    Be sure to register at the site so you can see large images.
    Also be sure to visit http://www.caimag.com/forum/

  3. #3
    Join Date
    Jun 2009
    Location
    PA
    Posts
    151

    Default

    This is a 69 ch motor, the feed and return are the same as the H. Not sure which one your looking for but the left is the feed the right is the return. Check your parts book on the fittings I think they are the same as what you see here, but I'm not an H man.


  4. #4

    Default

    Quote Originally Posted by murph View Post
    This is a 69 ch motor, the feed and return are the same as the H. Not sure which one your looking for but the left is the feed the right is the return. Check your parts book on the fittings I think they are the same as what you see here, but I'm not an H man.

    The cases I have the port is at the lower left 7 o'clock to the rear exhaust cam and is threaded at an angle 1/8 npt

  5. #5
    Join Date
    Jun 2009
    Location
    PA
    Posts
    151

    Default

    Pictures are everything, post some so we know exactly what your talking about. I'm not sure what your getting at.

  6. #6
    Join Date
    Jun 2005
    Location
    Northern Colorado
    Posts
    837

    Default

    Are any of the oil lines as small as 1/8" ?
    VPH-D

  7. #7

    Default

    Quote Originally Posted by murph View Post
    Pictures are everything, post some so we know exactly what your talking about. I'm not sure what your getting at.
    I will take a few pics and post soon

  8. #8
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,794

    Default

    Are any of the oil lines as small as 1/8" ?
    Only the feed to the top end.
    Robbie Knight Amca #2736

  9. #9

    Default Pictures of oil fittings go

    Quote Originally Posted by Rubone View Post
    Only the feed to the top end.
    Picture of oil port location not sure what the one at 7 o'clock to the rear cam and what is the proper fitting for there. also the breather is slightly off the mark when timing marks are lined up
    Attached Images Attached Images

  10. #10
    Join Date
    Oct 2013
    Location
    Maryland
    Posts
    278

    Default

    For what it's worth- my '67 XLH has an 1/8th pipe plug in it, but it is nowhere near a stock bike. Dale

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •