Results 1 to 3 of 3

Thread: Henderson Camshaft bearungs

  1. #1
    Join Date
    Jul 2014

    Default Henderson Camshaft bearungs

    Hi all,
    Does anyone have a set of camshaft centre bearing for a K henderson 4 that I can see the inside of to copy the measurements, or I could purchase? Thanks in advance Dale

  2. #2
    Join Date
    May 2011

    Default if you have no luck here, i've just put my motor together so unable to measure mine for you sorry Dale./

  3. #3
    Join Date
    Sep 2005
    Sarasota, Florida


    It shouldn't be hard to figure out what you need, and you can make the bearing to compensate for wear on the cam. The center bearing on my KJ was cut on both sides, and almost through. The bearing was then broken in half so it could be assembled on the cam as it was being pushed through the case. The bearing was broken so that the jagged break would perfectly re-align when the 2 halves were put together.
    Eric Smith
    AMCA #886

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts