Page 1 of 9 123 ... LastLast
Results 1 to 10 of 87

Thread: Corbin Speedometer's

  1. #1
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default Corbin Speedometer's

    I am going to start this thread so we can help each other with Corbin speedometer's. I have been working on them for a few years now and still am learning.
    I started buying only good one's. Doc Schuster and Peter Heintz helped me alot. Peter gave me all this Corbin parts a few years before he passed.
    He told me to send him $350 so I did. Thinking I was going to get a very small box of parts, then five big boxes of Corbin stuff shows up. He new that I would start working on them. Thank you Peter!
    So to help all of us, I will try to answer the things you need to know.
    I am always look for any Corbin parts. Broken, rusted and junk may be put back on a bike. That is my target.
    Terry Marsh marsh1915hd@msn.com

  2. #2
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default

    These are some Original Corbin Factory tools that I have found. Only seen one of the bezel remover and installer. There are a few head tester around.It has save me many $. The year a bought it I had broken $400 worth of bezels, so at $500 it was a good buy.

  3. #3
    Join Date
    Sep 2005
    Location
    Sarasota, Florida
    Posts
    3,511

    Default

    Terry, you must live in the most interesting museum in the world. Every picture you post has something amazing in the foreground, and often something just as amazing in the background. On a really wacky side note; I was watching an episode of "Have Gun Will Travel" and noticed in the credits that particular episode was filmed in Klamath Falls, Oregon. That show had one of the best theme songs of all t.v. westerns. Sorry for the hijack.
    Eric Smith
    AMCA #886

  4. #4
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default

    Eric, just the parts and bikes from the last 30 years. But it's all for sale! Well most of it, I need to keep almost all of it. Have been selling but then I find some more parts so I have to buy them.
    I use to watch Mr. P didn't know they filmed here. Tell jackhi.

  5. #5
    Join Date
    May 2006
    Location
    Southeast WI
    Posts
    179

    Default

    I have a 28 HD J-model with Corbin speedometer. I need a support bracket to keep the speedometer cable up off the tank top. Anyone have a picture of the correct bracket and where it it mounts. Any help appreciated...Rod

  6. #6
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default

    Indian Speedometers


  7. #7
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default This is why they need Cleaned up

    They have all been sitting for 50 years, and they all need cleaned up.


  8. #8
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default

    This is from an early teens Harley from 1916 through 1924


  9. #9
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default Recent Corbin Piles


  10. #10
    Join Date
    Mar 2009
    Location
    Klamath Falls, Oregon
    Posts
    296

    Default


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •