Results 1 to 4 of 4

Thread: Factory truing stand question?

  1. #1
    Join Date
    Sep 2007
    Location
    Jersey City
    Posts
    2,075

    Default Factory truing stand question?

    Good day lads, I have a factory truing stand that I've never used. My question here is the hardware that came with it. The shaft that sits on top the stand has a shoulder on it that fits tight in the spindle on the brake side of the star hub. On the other side, all it has is a nut that screws on and cinches up against the thrust bearing sleeve. I thought about making a tapered cone to slide on that end but see no reason since the thrust bearing can move where ever it wants anyway. So boys, am I missing hardware here? Thanks, Bob L
    Attached Images Attached Images

  2. #2
    Join Date
    Aug 2004
    Location
    Beautiful Northern New Mexico
    Posts
    2,797

    Default

    Nope Bob, That is all there is!!
    Robbie
    Robbie Knight Amca #2736

  3. #3
    Join Date
    Oct 2002
    Posts
    457

    Default

    do you have the indicator rod?

  4. #4
    Join Date
    Sep 2007
    Location
    Jersey City
    Posts
    2,075

    Default

    Thanks, Rob. Len, I don't use the rod because of the scratch the rim thing. I just set up two dial indicaters. Bob L

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •