Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Need cylinders

  1. #1
    Join Date
    Oct 2011
    Location
    New Mexico
    Posts
    22

    Default Need cylinders

    My 29 101 basket case is proving to be quite a project. I need a pair of usable cylinders. Any help is much appreciated.

    jimmy

  2. #2
    Join Date
    Jan 2008
    Location
    S.E.N.Y. State American side of Hudson River
    Posts
    217

    Default

    Take a look on Vintage Cycle Bay if you can't find anywhere else. They seem to have some stuff altho I haven't personaly used them
    D. A. Bagin #3166 AKA Panheadzz 440 48chief W/sidecar 57fl 57flh 58fl 66m-50 68flh 70xlh

  3. #3

    Default

    Those cylinders will be pretty hard to find. You Could, if you need to, use ANY Indian Scout Cylinders on your 101.

  4. #4
    Join Date
    Oct 2011
    Location
    New Mexico
    Posts
    22

    Default Thanks

    I appreciate both suggestions. Thanks.

  5. #5
    Join Date
    Aug 2006
    Location
    So Cal
    Posts
    593

    Default

    I believe I have seen those cylinders come up on E bay a couple times. I think their out there, trying to find a good set might be a bigger deal, maybe sleeve em? My 25's have been sleeved, wish ya lot's of luck with it and the Cannonbal. Also I believe they are making new ones now - think there from down under?

  6. #6
    Join Date
    Aug 2009
    Posts
    5

    Default

    Check out Indian Parts Europe. They seem to be building quite an array of 101 parts. Maybe they can hook you up with a pair of jugs:
    http://indianpartseurope.com/index.html

  7. #7

    Default

    Someone in Australia was making some nice ones, but I cant remeber the details, Try Parker Indian?
    Steve

  8. #8
    Join Date
    Mar 2011
    Location
    Near Bristol UK
    Posts
    55

    Default

    Jurgen Hecker trading as Hecker 101 was offering them, they originate from the Czech republic! However I cannot recommend him as it took almost a year to supply them. The quality was good with no alterations needed to fit them.

    Try Reno Indian dot com
    Regards

    Tim



    '36 four. '44 Chief & sidecar. '28 Scout. '67 XLCH. '70 BSA. and a Guzzi...............

  9. #9
    Join Date
    Oct 2011
    Location
    New Mexico
    Posts
    22

    Default

    Has anybody had any dealings with seller JDJIMN at vintagecyclebay.com ? He's out of Lake Elsinore, CA.

  10. #10
    Join Date
    Feb 2004
    Location
    Utah
    Posts
    205

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •