Need side car measurments
Guys, I need help! I posted this on the JD message desk with no luck. I need measurements for my 1918- 23 sidecar, the rear support rail that goes from spring to spring that the tub sits upon. I have the original front one but the rear was long gone. The question here is the width and height of the bar. The front measures out at 7/8X1/2". Is the rear the same? I know the rear is longer. I just measure between the spring bosses on the frame. I also need the tub mounting hole spacing, two in the middle and one off to each side. Any help would greatly appreciated, Bob L
Reply With Quote