Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47

Thread: AMCA Judging Program

  1. #1
    Join Date
    Jan 2005
    Location
    central Iowa
    Posts
    105

    Default AMCA Judging Program

    This will be the location to inquire about policy and procedure questions. As we go forward working together, I hope everyone discovers that open, honest, and respectful communication is my policy. The AMCA judging program finds its true strength in the knowledge and experience of its judges, all working as a team in supportive fashion.

    First, I want to acknowledge the tremendous contributions of former Chief Judge Kevin Valentine and former Assistant Chief Judge Robin Markey. The reason I find myself in the position of serving as your new Chief Judge is essentially because of the thoughtful mentoring and guidance of both of these men. Gradually, over the last five years or so, they have allowed me to become increasingly involved in administrative duties and policy decisions, while I progressed in a self-imposed lengthy apprenticeship (12 meets), with subsequent promotions to field judge and senior judge, the later in 2009. Having now immersed myself in the complex duties of the job of Chief Judge, I’m guessing I have become one of the few people on the planet who have some understanding of all the behind the scenes work they did for this organization. Thank You Kevin and Robin! We all look forward to seeing you both on the judging field!

    The AMCA, and specifically the judging program, is my passion. While I certainly didn’t expect to be in this job at this time, I intend to build positively on the core strength of the system as it now exists. The program is designed to rely on the entire judging staff working in concert. I have a team of dedicated individuals working along side of me including our new Assistant Chief, Don Dzurick, and National Deputy Judges located across the country and world, all of whom are trained and experienced in running judging events. I will be encouraging all current and former judges to recommit themselves to our efforts as, once again, our strength is in the collective knowledge and involvement of the judges whether classified as apprentice, field, or senior level. It should also be understood that the Chief Judge’s role is principally to enforce rules and regulations that are formulated by a judging committee and approved by the national board of directors while completing all of the associated administrative duties that accompany this role.

    The judging committee is currently made up of the following individuals:
    Steve Dawdy, Chief Judge
    Don Dzurick, Assistant Chief Judge
    Walt Curro
    Marty Megregian
    Bruce Linsday
    Dave & Brenda Lash
    Steve Slocombe
    Peter Reeves
    Don Spence
    Fred Johansen

    Having witnessed the inner workings of the judging committee first hand I can, without reservation, state that each of these individuals has only the best interest of our fine club in mind. All policy and procedure decisions are arrived at following extremely deliberate review and majority vote. As the chairman of the committee, I hold a nonvoting position.

    The judging changes implemented for the first time at the Sunshine meet were as follows:

    Competition modified (nonfactory, period) race motorcycles will be judged in a separate class with rules and awards unique to the class. The protocol for judging these important motorcycles is under development. Competition motorcycles restored to factory specifications will continue to be judged within their regular class as defined by year of manufacture.

    The previously established requirement that all judged motorcycles must have original motors was more clearly defined. Specifically, all judged motorcycles must have original engine cases. An initiative to more carefully verify originality of engine cases was implemented. Two new accompanying rules were introduced. First, if it can be clearly established that the cylinders and/or heads are reproduction, a 6-point deduction is applied. Second, if it can be clearly established that the frame is reproduction, a 6-point deduction is applied.

    The changes represent a long held opinion within the AMCA judging program that the heart of the motorcycle is the engine and frame, and for a motorcycle to be considered a true antique and to be accurately judged, the engine and frame should be correct for the year and appear original. The 6-point deduction, for reproduction engine top end and frame, serves to avoid disqualification while prohibiting such examples from achieving senior/winner’s circle status, which requires 95 points or better.

    Finally, the long ago established rule that all judged motorcycles must demonstrate their operational capacity by briefly running was enforced. A few motorcycle that had been asleep for years sputtered to life, much to the enjoyment of all involved.

    Thank you all for your support. I look forward to a great year on the judging field working with a great group of judges and working with AMCA members who bring their wonderful machines to be judged.

    Steve Dawdy
    Steve Dawdy
    #33

  2. #2
    Join Date
    Feb 2009
    Location
    England UK
    Posts
    143

    Default

    Steve
    Is there any change to the Indian, matching year but not matching numbers stance regarding motor/frame?

  3. #3
    Join Date
    Apr 2008
    Posts
    252

    Default

    I like the way you started your Thread on the same question i posted so you don't have to answer both the question i posted .
    Jeff Bowles
    Arkansas
    Membership # 14023
    1957 Sportster

  4. #4
    Join Date
    Feb 2002
    Location
    Mitford Community, South Carolina
    Posts
    509

    Default

    Steve, a carte blanche decision to gig a bike for 6 points for a best-available reproduction cylinder on an other wise correct motor does not serve the desires of the AMCA to promote the preservation of these antique motorcycles.

    While I can understand the desire to in effect dis-allow the repop 8-valve and OHV conversions along with reproduction engine cases that were undoubtedly slipping through the cracks, the new rule that reproduction cylinders are across the board now a 6-point deduction is going to place extreme hardship on some of us less-wealthy knucklehead owners. It is my understanding that sleeved cylinders on knuckleheads will end up in cracked cylinders due to the thinness of the remaining material. Therefore, those of us who intend to ride our restored knuckles (after all, is that not the underlying goal of the Club) are put in an untenable situation. If we want to get a Senior, we have two alternatives - we either leave these fine machines as trailer queens or we take the chance of blowing a barrel (which can leave quite spectacular results).

    According to the rules as outlined, there is already a means of rejecting obvious bogus competition machines via a separate class for what in effect will be a period-modified competion class. However, there should the means to allow "the best available reproduction" parts in any and all situations (except for repro engine cases), else there is no end to the madness. (Are the block-lettered Guide headlights to be gigged in their point-entirety when it is known that the lettering should be in script?)

    In this particular case which I reference there are several grades of alternative cylinders, at least one version that in most but not all aspects meets the "best available repro" spec formerly in place. And they ain't cheap! Obviously the more common repro cylinders would not meet that criteria.

    It has been my experience that when a problem in any arises, the effect of the change to correct that problem often goes too far. The pendulum has swung too far here and it is my hope that saner rules soon apply.
    Last edited by Lonnie; 03-21-2010 at 02:33 PM. Reason: oopses and more oopses
    Lonnie Campbell #9
    South Cackalackey, U.S. of A.

    Come see us at the Fourth Annual AMCA Southern National Meet - May 17 - 19, 2013 at Denton FarmPark, Denton, N.C.

    Visit the website for vendor and visitor information at www.amcasouthernnationalmeet.com

  5. #5
    Join Date
    May 2003
    Location
    San Francisco
    Posts
    398

    Default re-pro top ends.

    Hi Lonnie,
    If I may step in on this one, the rule is to be enforced as "if one can't tell, it's OK". So, if the repro example is so good, as to have NO distinguishing differences compared to an original, then it passes. The bottom line here is the machine. We strive for an example to serve as a future reference. The engine serves as the heart of said machine. It would be best, on a judged bike, to have the real deal.
    HTH, RF.

  6. #6
    Join Date
    Jan 2005
    Location
    central Iowa
    Posts
    105

    Default

    Hi Greg:
    Thanks for the question, and a good one. There is no change, to date, regarding the established rule for Indians.

    Steve
    Steve Dawdy
    #33

  7. #7
    Join Date
    Feb 2009
    Posts
    18

    Default

    Nothing personal but I dont want my bike judged by a committe led by a guy who was an apprentice just last year. I have an Indian that I was going to have judged this year but not now. I want a chief judge who really knows the details, and I am willing to bet no one on this new judging committe could even shine Robin Markeys shoes.

  8. #8
    Join Date
    May 2003
    Location
    San Francisco
    Posts
    398

    Default Good of the Club

    Quote Originally Posted by Anthony View Post
    Nothing personal but I dont want my bike judged by a committe led by a guy who was an apprentice just last year. I have an Indian that I was going to have judged this year but not now. I want a chief judge who really knows the details, and I am willing to bet no one on this new judging committe could even shine Robin Markeys shoes.
    I understand you point Anthony, but please don't deny the club seeing your 640, or which ever bike it may be that you wish to get judged. The Chief Judge does not necessarily have the expert credentials on each & every marque. Just like Kevin was an Indian guy when he was Chief, he was lacking on the HDs. Now we have a Chief who is an HD guy, and probably lacking on Indian. The Chiefs' duties are more of procedure, and management, than marque expertise. And besides, I'm betting that Robin will still be on the Field, sharing his experience and wisdom, as it's all for the Good of the Club. At least I hope he will.
    I just can't invision Robin in shiney shoes either. Muddy boots, yes, shiney shoes, dunno.
    All the best, RF. (a lousy shoe shiner)

  9. #9

    Default

    in which ways would a judge go about "clearly establishing" whether a cylinder is reproduction? would the "undetectable" rule apply? or,if undetectable, would the judge be able to take other factors into account ? such as the rarity of the model,or the owner or source of the bike,or the lack of documentation,or the judge's personal knowledge of that particular bike.

  10. #10
    Join Date
    Jan 2005
    Location
    central Iowa
    Posts
    105

    Default

    A high quality reproduction top end that accurately represents original is acceptable. The rule if you can't tell (detect), you can't tell (deduct) applies. It would not be appropriate for a judge to deduct based on other information when the component can't be discerned from original under direct examination.
    Steve Dawdy
    #33

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •