Only registered users may post on this forum. You must be an AMCA member to register. Click the register link on the top right to proceed.
On the 66 sportster gas tank was the decal or tank name plate used, the book list both, was one standard and the other optional ?
What are the things to look for to tell the difference between a `52 K-model frame and an early Sportster frame? I've read back a few posts and seen...
On the K model race bikes there is usually the corner cut off of the cam cover and the kick cover. Was this done solely to save weight? or was there...
Does anyone know which carb is correct for a 1962 Sportster? I've heard a DC-10 or DC-12. Which years are for each. I've also been told that the...
Good day lads, Got my next round of 65 XLCH questions. Thanks in advance for your efforts. Bob L 1. Is the rear fender vibration buffer Parkerized...
On the front motor mounts on my 65 XLCH I now no that the bolts and washers are parkerized but what about the tubes that go between the mounting...
Hi again, can someone tell what the OD is on model k front axle? My axle measure 21/32, is this correct?
Hi guys, building an old Sportster and have a problem with the intake manifold. When I place it against the Heads there is a small space and it does...
Hi, I am trying to get the damper out of the sliders but am having some trouble with it. It looks like you might need some special tool or socket...
Why are Sportsters not a bigger topic for discussion? Especially Iron Heads?
Hi, I'm fixing to rebuild the transmission on a 73 Sportster, I have always used the Clymer manual I got many years ago. I was informed on another...
Does anyone have a suggestion for a modern 6V battery for my '56 KHK?
Does anyone have information on how to install the spark advance and throttle to the handgrips for a K model sportster? We have the grip sleeves.
I was looking through some of my photos and found several photos of early K models with a chrome or stainless strap across the primary cover. Having...
The CAD oil lines for my 55KH were readily available from Sporty Specialties in Fullerton, Ca. They are the same items from the V-Twin catalog PN...
Jim Smith Canadian;Here is a picture of my 1970 Boat tail ,pretty sure it's original is any one elses decal off centre like this.
A very knowledgeable antique bike collector advised me that my bike was missing a decal. The XLCH in the manual has this decal, as does the one in...
CONT.The reason for predominate inlet when the back pulse expands leaving inlet mouth it expands in every direction even toward engine,the pulse is...
SR. higher piston speed dictates opening the intake valve real early,this gives the hydrated air a chance to get moving.Now big plenum or shorty...
Hey guys, here to pick your brains again. My Sportster motor is 99.99% done being rebuilt. Last thing to install are the oil lines that run from the...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
