PDA

View Full Version : Need cylinders



jimmyallison
11-26-2011, 10:39 PM
My 29 101 basket case is proving to be quite a project. I need a pair of usable cylinders. Any help is much appreciated.

jimmy

D.A.Bagin
11-27-2011, 07:28 AM
Take a look on Vintage Cycle Bay if you can't find anywhere else. They seem to have some stuff altho I haven't personaly used them

indianut
11-27-2011, 10:00 AM
Those cylinders will be pretty hard to find. You Could, if you need to, use ANY Indian Scout Cylinders on your 101.

jimmyallison
11-27-2011, 06:19 PM
I appreciate both suggestions. Thanks.

Tom Lovejoy
11-27-2011, 11:05 PM
I believe I have seen those cylinders come up on E bay a couple times. I think their out there, trying to find a good set might be a bigger deal, maybe sleeve em? My 25's have been sleeved, wish ya lot's of luck with it and the Cannonbal. Also I believe they are making new ones now - think there from down under?

cowtowngil
11-28-2011, 12:55 PM
Check out Indian Parts Europe. They seem to be building quite an array of 101 parts. Maybe they can hook you up with a pair of jugs:
http://indianpartseurope.com/index.html

yhprum
12-02-2011, 01:01 AM
Someone in Australia was making some nice ones, but I cant remeber the details, Try Parker Indian?

Indiantim
12-02-2011, 01:47 PM
Jurgen Hecker trading as Hecker 101 was offering them, they originate from the Czech republic! However I cannot recommend him as it took almost a year to supply them. The quality was good with no alterations needed to fit them.

Try Reno Indian dot com

jimmyallison
12-05-2011, 11:34 PM
Has anybody had any dealings with seller JDJIMN at vintagecyclebay.com ? He's out of Lake Elsinore, CA.

JohnR
12-06-2011, 09:50 AM
Is the link below reliable?


http://www.enfieldracing.com/indian_scout_17.html

jimmyallison
12-06-2011, 01:31 PM
I visited with this guy at the Vintage Event at Barber Motorsports in Oct. He seemed to be a good guy to me.

jimmyallison
12-06-2011, 01:32 PM
Is the link below reliable?


http://www.enfieldracing.com/indian_scout_17.html

My post above was refering to this guy. Sorry.

gsottl
12-06-2011, 01:53 PM
76677668I have 3 sets of 101 cylinders that I do not need personally and can swap/sell - Would swap against Chiefs cylinders 1932-39 - any version or sell.

Set 1 front Min. 73,90 / Max.74,21 pitted (new bore app.75,00) rear Min. 73,90 / Max.73,95 (good)
Set 2 front Min. 74,04 / Max.74,58 pitted (new bore app.75,00) rear Min. 74,45 / Max.74,95
Set 3 front Min. 74,02 / Max.74,22 (scores) rear Min. 74,10 / Max.74,60 (scores)
mesurements in MM

I have put them as pairs, but can also swap/sell them in another arrangement.

Please contact me by PM with email-address for detailed pictures.

Greetings,
gsottl
AMCA # 15841