PDA

View Full Version : Linkert carb nozzle question



T. Cotten
12-17-2008, 10:26 PM
Can anyone identify the nozzle in the photo with the tag attached?

It was supplied to fit an M-5, but those should look like the one on the far right (as per Palmer's).
The mystery nozzle has bevels like the Indian 'Bonneville' on the far left (ignore the broken tap inside), and progressive bleed holes like the Indian 'Standard' nozzle second from the left.

But it only has four holes like an M-741 or H-D flatty Linkert.

Any clues out there?

Thanks in advance,

...Cotten